Servers on Dutch soil, with modern hardware and our own network.

Fast hardware

AMD Ryzen and EPYC, Intel Xeon, ECC memory and NVMe storage. Bare metal: the whole machine is yours.

Our own network

Your traffic runs over AS211588, with a core at two Amsterdam sites and connections to more than 600 networks.

Full control

IPMI access, root and your own ISO. Linux, Windows or a hypervisor: you decide what runs on it.

Our range

Discover our dedicated servers

Four families, each with its own strength. Pick what your workload needs: many cores, a proven server platform, high clock speed or a second life for good hardware.

Not sure yet whether you need bare metal? The difference between a VPS and a dedicated server lays out the trade-off.

AMD EPYC dedicated servers

Server processors with many cores and memory channels per socket. For virtualisation, databases and anything that scales in parallel.

Typical

  • Many cores per socket
  • ECC memory
  • NVMe storage
  • 1 or 10 Gbit/s uplink

Processors in this family: AMD EPYC 7302, 2x AMD EPYC 7551 and more

From €199,00 /mo

View servers — AMD EPYC dedicated servers

Do not see your configuration? Get in touch and we will build it.

4

Dutch data centres

600+

networks via AS211588

10 Gbit/s

uplink available

/56

IPv6 per data centre, /48 if you need it

Why the Netherlands

Why a dedicated server in the Netherlands?

Location is more than a flag on a map. It decides which network carries your traffic, how short the path to your visitors is, and which law your data falls under.

Dutch data centres

Your server lives at BIT in Ede or at Greenhouse in Naaldwijk, both on Dutch soil. The network core sits at two Amsterdam sites, NorthC and NIKHEF, so a single failure does not take the network down. Your data stays in the Netherlands, under Dutch and EU law.

Our own network, not a resold line

Your traffic runs over our own AS211588. That network connects to five transit providers and sits on six internet exchanges: ERA-IX, NL-ix, Frys-IX, Speed-IX, nine and 1-IX EU, with ports of up to 100 Gbit/s. On top of that we peer directly with more than 600 other networks.

Short paths, low latency

Because of that direct peering, traffic to Dutch, Belgian and German providers crosses the exchange directly, without a detour through a transit network abroad. Fewer hops means lower latency and fewer places where things can go wrong. You can check your exact path yourself on bgp.tools.

See our data centres and network Live connectivity on bgp.tools

The numbers

Own network
AS211588
Internet exchanges
6
Transit providers
5
Direct peers
600+
IX ports
up to 100 Gbit/s
Core
NorthC + NIKHEF, Amsterdam
Servers
BIT Ede and Greenhouse Naaldwijk

Source: PeeringDB and bgp.tools, AS211588 (Innovation Harbor B.V.).

Bandwidth: fair use at the 95th percentile

A dedicated server gets a 1 or 10 Gbit/s uplink and no "unlimited" that gets throttled later. We measure your traffic continuously and drop the top five percent of samples: a peak costs you nothing, only structurally high usage counts. The limit is agreed per situation.

How we measure traffic

Network and data centres

A partner to build on

We run our own network on our own hardware in Dutch data centres. You notice it in the details.

Bring your own IPs

Own IP space, for anycast for instance? With BGP on your server or on our routers we route your addresses to the internet.

Close to the internet

Our core sits in Amsterdam, on six internet exchanges including ERA-IX, NL-ix and Frys-IX, with ports of up to 100 Gbit/s. We also help you set up your own transit connection.

IPv6 from day one

Every server comes with an IPv4 address and a /56 IPv6, in every data centre. Need more? You get a /48.

Four data centres

Your server lives at BIT in Ede or Greenhouse in Naaldwijk; our network core sits at NorthC and NIKHEF in Amsterdam.

See the locations

IPMI and remote hands

Console access at hardware level, and engineers who can get to the rack when needed.

Fair use, no small print

We measure traffic at the 95th percentile. A peak costs you nothing; only structural usage counts.

How we measure traffic

Rather something else?

Bare metal is not always the answer. These are the alternatives on the same network.

Would you rather hand over the management? What managed servers do and do not cover explains where the line sits.

FAQ

Frequently asked questions

Do you still have questions? Our customer service is available to help

A dedicated server is just like your computer but online 24/7, in no way you are sharing compute resources with the customers. Heavy workloads? No problem, you have all the CPU time on these machines.

No, we're currently working on instant deployments and will be making this available to you soon!

In the Netherlands: at BIT Datacenters in Ede or at Greenhouse Datacenters in Naaldwijk. You pick the location. Traffic runs through our network core in Amsterdam (AS211588, Innovation Harbor B.V.).

Yes, by default we offer a basic form of protection. If you need advanced protection, we can help you with that aswell.

Yes, we can arrange every configuration as long as it fits the server concept.

We can do this, just make a request through a website ticket or order the add-on (free) and we will arrange panel installation for you.

Yes! You're good to go as long as you're keeping it legal.

Yes! As long as you have at least a /24 for IPv4 or a /48 for IPv6 we can help you setup your own IPs.
Set-up fee is EUR 50.

Ofcourse. This can be for anycasting, automatic failover (path-prepend) or Bring Your Own IPs.
Set-up fee is EUR 50.

Is your hardware running elsewhere today? See the migration guide for moving to PlanetNode. Other questions are answered in the knowledge base.

Blog

Recent articles

Already convinced?

Tell us what you want to run. You will get a proposal from someone who manages the servers themselves.

Get in touch